The pin connectors usually have 4 Molex pins inside the adapter or converter cable. Besides, the 4-pin Molex power connectors are the most standard connector type accessible today, and they were for all PATA and hard drives. Applications often require rugged terminals and lower mating force to reduce operator fatigue during assembly and/or to withstand high-mating cycles. FACTS CHECKED BY Jose George In the late 1950s, the Molex Company revealed its pin and socket design for connectors. A 4-pin to 6-pin connector helps you achieve compatibility with your GPU. The pre-lubricated version can be mated up to 250 times and fit into standard Micro-Fit 3.0 Housings. Micro-Fit 3.0 RMF (Reduced Mating Force) Terminals are designed for applications needing lower engagement and disengagement forces or when the units are cycled frequently. For lower applied costs, OEMs often prefer a compliant pin connector over one that requires soldering. Prevents loose connections or separation in high-vibration & continuous shock environments. Cable assemblies support reliable connections across almost every industry. The Micro-Fit 3.0 CPI Header mates with Micro-Fit 3.0 Receptacle, allowing running changes as boards transition from solder to press-fit applications. Molex Loxon Locking Quick Disconnect (QD) Terminals. The robust eye-of-the-needle design provides a reliable interface when recommended board layouts are followed. Micro-Fit 3.0 CPI (Compliant Pin) Connectors provide a compliant pin interface while maintaining all the features of the standard Micro-Fit 3.0 Connector. The TPA reduces terminal back-out by providing locking redundancy assemblers cannot insert the TPA unless terminal is properly inserted. The Micro-Fit TPA Connector Family helps prevent failure in end products by offering terminal position assurance (TPA). Doing so can cause damage to the connector and/or terminal and consume valuable labor time. In hard-to-reach applications, such as drawers or fan assembly trays, connectors need to be mated and unmated without being seen. It’s part of a family of computer power connections engineered by the Molex Connector Company, which also created other internal computer power connectors like the larger 4-pin Molex used by older hard drivers and the motherboard power connector. They allow mating misalignment (per product drawing). The motherboard fan connector is a Molex KK connector. Micro-Fit 3.0 Blind-Mate Interface (BMI) Connectors are designed for blind-mating applications. OEMs often need power connectors in space-constrained applications. The Micro-Fit Connector Family offers up to 8.5A with a 3.00mm pitch, delivering power in a compact package in wire-to-wire and wire-to-board configurations. Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and. Sort Molex MX150 Wire Connector Harley Waterproof 6 Pigtail Assembled with CPA 12.06 to 33.65 Bulk 500ct Molex 43030-0007 Female Micro-Fit 3.0 Crimp.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |